What Should Be Paid Attention To When Selecting Inverters
Mar 12, 2023| 1. Be sure to choose metal shell products: Due to the high power and heat generation of the on-board inverter, if the internal heat cannot be dissipated in a timely manner, it can affect the lifespan of the components, and in severe cases, there is a risk of fire. The metal shell, on the one hand, has good heat dissipation characteristics, and on the other hand, it will not burn. It is best not to choose products with plastic shells. Even if a fan is added to help dissipate heat, firstly it increases the noise during use, and secondly, the working life of the fan is generally relatively short, which reduces the reliability of the entire machine. If it stops running one day, the consequences can be serious.
2. It is necessary to choose a split type product instead of an integrated one: There are four drawbacks to an integrated one. Firstly, due to the low depth of the cigarette lighter socket in the car, the rear of the integrated product is heavy, and the bumps during driving can easily shake off the inverter or cause poor contact. Secondly, if the integrated inverter is inserted into the cigarette lighter socket and the rear part is exposed for a long time, it will affect the gear shifting operation of the right hand, which is closely related to driving safety. Please be careful. Thirdly, due to being directly plugged into the cigarette lighter socket, the integrated inverter cannot be used in the rear row. Fourthly, the integrated casing is made of plastic, which is known to be resistant to high temperatures. Therefore, the contact between the integrated inverter and the cigarette lighter socket will generate high temperatures through high current, causing deformation or melting of the head, and even causing a fire in severe cases. Therefore, whether from the perspective of safety or convenience of use, an integrated inverter cannot be selected.
3. For products with the same power and similar volume, priority should be given to heavier ones: as the saying goes, 'you get what you pay for'. The heavier weight indicates that the outer shell is thicker, which is beneficial for heat dissipation. At the same time, it also indicates that the internal transformer has a large power margin and can drive high-power loads for a long time.
4. Are various protection functions complete? A good car inverter should have complete protection functions, which can protect your car and power supply in all situations. It should also have a sound and light alarm function to remind you to handle various situations in a timely manner. The general protection functions that should be provided are input undervoltage, overvoltage protection, over temperature protection, output overload, and output short circuit protection.
5. Conversion efficiency: This is a very important indicator of the inverter. The higher the inverter efficiency, the longer the battery usage time, and the smaller the heat generated by the inverter. Generally, it should reach over 90%. But this indicator cannot be tested by users, and users can only make simple judgments based on the heat output of the inverter by carrying a high-power load. A good inverter should be able to operate for a long time without overheating when loaded with 80% of the nominal power.
6. The plug wire of the cigarette lighter should be thick and the length should be convenient for use: to save costs, the wiring of products on the market is generally not long, which is only 0.5 meters. The use of the rear row is not so convenient. Personally, I believe that the wiring should be longer and much more convenient to use.
7. When the electrical power is greater than 150W, it is necessary to use a battery clamp to directly power the battery: the car cigarette lighter socket can only pass around 10A of current, so high-power inverters must be equipped with an additional battery clamp cable to directly power the battery. Nowadays, some manufacturers, in order to save costs, do not equip 300W products with battery clamp wires. Using this type of product can cause damage to car wiring, and in severe cases, it can cause fires. Car owners should be careful.
8. Pay attention to the form of the output socket: it should be able to use national standard two-phase and three-phase plugs. 90% of the products on the market only have American standard three-phase sockets, which is very inconvenient to use. Although the matter is small, it can demonstrate the strength of the enterprise. Personally, I believe that products with national standard sockets and universal sockets should be prioritized for export.


